Suspension

Easy Fill Tire Alert Does Not Activate

9steps
~54min
2/5difficulty
Done 0 of 9
Diagnosis Procedure

The Easy Fill tire alert does not function while inflating a tire when the select lever position is in P-range with the ignition switch is placed ON.

LOCATION CHANGE

Move the vehicle to another area and repeat the procedure of the Easy fill tire alert function. Refer to Easy Fill Tire Alert Function.

Is the function normal?

YES>>

Inspection End.

NO>>

GO TO 2.

PERFORM SELF DIAGNOSTIC RESULT

CONSULT

  1. Ignition switch ON.

  2. Select “Self Diagnostic Result” mode of "BCM(AIR PRESSURE MONITOR)".

  3. Check DTC.

Are any DTCs detected?

YES>>

Refer to DTC Index.

NO>>

GO TO 3.

CHECK HAZARD WARNING LAMP OPERATION

Check hazard warning lamp operation with hazard switch.

Do the hazard warning lamps operate?

YES>>

GO TO 4.

NO>>

Refer to Diagnosis Procedure.

PERFORM SELF DIAGNOSTIC RESULT FOR TCM

CONSULT

  1. Ignition switch ON.

  2. Select “Self Diagnostic Result” mode of “TRANSMISSION”.

  3. Check DTC.

Are any DTCs detected?

YES>>

Refer to Diagnosis Description.

NO>>

GO TO 5.

CHECK HORN OPERATION

Check horn operation. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 6.

NO>>

Repair or replace malfunctioning components.

PERFORM SELF DIAGNOSTIC RESULT

CONSULT

  1. Drive at a speed of 40 km/h or more for 3 minutes, and then drive the Nissan Murano vehicle at any speed for 10 minutes.

  2. Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)".

  3. Check DTC.

Are any DTCs detected?

YES>>

Refer to DTC Index.

NO>>

Replace BCM. Refer to Removal and Installation.