Suspension
Low Tire Pressure Warning Lamp Stays on
In this manual: Suspension
3steps
~18min
2/5difficulty
Done 0 of 3
CHECK BCM CONNECTORS
Ignition switch OFF.
Disconnect BCM connectors.
Check terminals for damage or loose connections.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace damaged connectors.
BCM POWER SUPPLY AND GROUND CIRCUITS
Check BCM power supply and ground circuits. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace BCM. Refer to Removal and Installation.
NO>>Repair BCM circuits.
Was this page helpful?