Id Registration Cannot Be Completed
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTCs
Register TPMS sensor IDs
CHECK TIRE PRESSURE SENSOR ACTIVATION TOOL
Check tire pressure sensor activation tool.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Replace the battery of tire pressure sensor activation tool or repair/replace the tire pressure sensor activation tool.
TIRE PRESSURE SENSOR ID REGISTRATION
Perform tire pressure sensor ID registration. Refer to Work Procedure.
Never register ID in a place where radio waves are interfered (e.g. radio tower).
Never register ID in a place close to Nissan Murano vehicles including TPMS.
Is tire pressure sensor ID registration completed?
YES>>Inspection End.
NO>>GO TO 3.
CHECK TIRE PRESSURE SIGNAL
Change the work location and perform ID registration again.
Rotate tire by 90°, 180°, or 270°. (This Step is to change tire pressure sensor position.)
Open the door close to the tire of which ID registration is ongoing.
*: Radio wave reception condition depends on Nissan Murano vehicle architecture (e.g. body harness layout, tire wheel design) or environment.
When ID registration is performed, which wheels do not react?
All wheels react and ID registration is possible.>>Inspection End.
Only certain wheel(s) do not react.>>Replace applicable tire pressure sensor. Refer to Removal and Installation.
All wheels do not react.>>Check the tire pressure receiver (remote keyless entry receiver). Refer to Diagnosis Procedure.