Suspension

Low Tire Pressure Warning Lamp Does Not Turn on

3steps
~18min
2/5difficulty
Done 0 of 3
Diagnosis Procedure
  • Activate and display TPMS sensor IDs

  • Display tire pressure reported by the TPMS sensor

  • Read TPMS DTCs

  • Register TPMS sensor IDs

PERFORM SELF DIAGNOSTIC RESULT

CONSULT

  1. Ignition switch ON.

  2. Select “Self Diagnostic Result” mode of "BCM(AIR PRESSURE MONITOR)".

  3. Check DTC.

Is DTC U1000 detected?

YES>>

Refer to Trouble Diagnosis Flow Chart.

NO>>

GO TO 2.

CHECK COMBINATION METER

Check combination meter operation. Refer to Diagnosis Description.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Replace combination meter. Refer to Removal and Installation.

CHECK LOW TIRE PRESSURE WARNING LAMP

Disconnect BCM harness connector.

Does the low tire pressure warning lamp activate?

YES>>

Replace BCM. Refer to Removal and Installation.

NO>>

Check combination meter operation.