Body Exterior, Doors, Roof & Vehicle Security

Front Grille

~1min read
Exploded View
1. Front grille 2. Front emblem 3. Front camera (if equipped)
4. Core support cover Clip Pawl
Removal and Installation

REMOVAL

Remove the core support cover.

Release hood switch harness clip from upper radiator air guide and disconnect harness connector

from hood switch.

Disconnect overflow hose and remove upper radiator air guide (LH/RH).

Release clips then remove front grille.

Disconnect the harness connector (A) from the front camera (if equipped).

INSTALLATION

Installation is in the reverse order of removal.