Body Exterior, Doors, Roof & Vehicle Security

Rear Bumper

~2min read
Exploded View
1. Rear bumper fascia side bracket (LH) 2. Rear bumper fascia 3. Rear bumper reinforcement support (LH)
4. Rear bumper fascia reflector (LH) 5. Sonar sensor (inner) 6. Sonar sensor (outer)
7. Rear bumper fascia lower 8. Sonar finisher 9. Rear bumper fascia molding (LH)
10. Rear bumper fascia finisher 11. Rear bumper fascia molding center 12. Rear bumper fascia molding (RH)
13. Rear bumper fascia reflector (RH) 14. Motion activated back door bracket 15. Rear energy absorber
16. Rear bumper reinforcement 17. Rear bumper fascia side bracket (RH) 18. Rear bumper reinforcement support (RH)
Removal and Installation

REMOVAL

Remove rear combination lamps (body side) (LH/RH). Refer to Removal and Installation.

Partially remove rear over fender (LH/RH). Refer to Exploded View.

Remove rear bumper fascia upper screws.

Remove rear bumper fascia screw (A) (LH/RH).

Disconnect motion activated back door control unit harness connector (if equipped).

Disconnect sonar sensor harness connectors.

Release rear bumper fascia pawls from the rear bumper fascia side bracket (LH/RH) and remove.

Remove rear energy absorber.

Remove rear bumper reinforcement nuts (LH/RH) then remove rear bumper reinforcement.

Remove rear bumper reinforcement support bolts (LH/RH) then remove rear bumper reinforcement support (LH/RH).

INSTALLATION

Installation is in the reverse order of removal.

  • Blind Spot Warning: Refer to Description.

  • Rear Cross Traffic Alert (RCTA): Refer to Description.

SectionMeasurementMinimumTarget ValueMaximum
A-A Clearance 0.1 (0.004) 1.5 (0.06) 2.9 (0.11)
B-B Clearance 4.1 (0.16) 6.0 (0.24) 7.9 (0.31)
Surface height -1.4 (-0.06) 0.5 (0.02) 2.4 (0.09)
C-C Clearance 0.0 (0.00) 0.3 (0.01) 1.0 (0.04)
Surface height -0.1 (-0.004) 0.7 (0.03) 1.5 (0.06)
D-D Clearance 0.0 (0.00) 1.0 (0.04) 2.0 (0.08)
E-E Clearance 0.1 (0.004) 1.2 (0.05) 2.3 (0.09)
Surface height -1.0 (-0.04) 0.0 (0.00) 1.0 (0.04)
F-F Clearance 0.0 (0.00) 1.0 (0.04) 2.0 (0.08)
G-G Clearance 0.0 (0.00) 0.5 (0.02) 1.5 (0.06)
H-H Clearance 0.00 (0.00) 1.0 (0.04) 2.0 (0.08)
I-I Clearance 6.1 (0.24) 8.0 (0.31) 9.9 (0.39)
J-J Clearance 0.0 (0.00) 0.0 (0.00) 0.7 (0.03)
K-K Clearance 0.3 (0.01) 1.0 (0.04) 1.7 (0.07)
L-L Clearance 0.5 (0.02) 1.5 (0.06) 2.5 (0.10)
M-M Clearance 0.5 (0.02) 1.0 (0.04) 2.5 (0.10)
N-N Clearance 0.00 (0.00) 1.0 (0.04) 2.0 (0.08)