Driver Controls
Front Wiper Arm
In this manual: Driver Controls
~1min read

| 1. | Front wiper blade (RH) | 2. | Front wiper arm (RH) | 3. | Front wiper arm cover (RH) |
| 4. | Front wiper arm cover (LH) | 5. | Front wiper arm (LH) | 6. | Front wiper blade (LH) |
REMOVAL
Operate the front wiper arms into the auto stop position.
Open the hood.
Remove the front wiper arm cover.
Remove the front wiper arm nut.
Raise the front wiper arm, then remove the front wiper arm.
INSTALLATION
Clean the front wiper arm mount as shown.

Operate front wiper motor to move the front wiper to the auto stop position.
Adjust the front wiper blade position. Refer to Adjustment.
Install the front wiper arm and the front wiper arm nut.
Install the front wiper arm cover.
Check that the front wiper blades stop at the specified position. Refer to Adjustment.
Clearance between the end of cowl top cover/ front fender cover and the top of front wiper blade center.

| 1. | Windshield glass | 2. | Front fender cover | 3. | Front wiper blade (RH) |
| 4. | Cowl top cover | 5. | Front wiper blade (LH) | C. | 41.6 mm ± 7. 5 mm (1.64 in ± 0.30 in) |
| D. | 44.2 mm ±7.5 mm (1.74 in ± 0.30 in) |
Was this page helpful?