Driver Controls

Rear Wiper Arm

~1min read
Exploded View
1. Rear wiper arm cover 2. Seal 3. Rear wiper arm assembly
4. Rear wiper blade
Removal and Installation

REMOVAL

Operate the rear wiper arm into the auto stop position.

Remove the rear wiper arm cover.

Remove the rear wiper arm nut.

Remove the rear wiper arm assembly.

INSTALLATION

Clean the rear wiper arm mount as shown.

Operate the rear wiper motor to move it to the auto stop position.

Install the rear wiper arm by positioning the rear wiper blade in alignment with rear window defogger wire then tighten the rear wiper arm nut to specification. Refer to Inspection.

Install the rear wiper arm cover.

Check that the rear wiper blade stops at the specified position. Refer to Inspection.

Inspection
A. Rear window defogger wire B. 49.7 ± 7.5 mm (1.96 ± 0.30 in)