Ventilation, Heater & Air Conditioner
High-Pressure Pipe
In this manual: Ventilation, Heater & Air Conditioner
~1min read
REMOVAL
Discharge the refrigerant. Refer to Recycle Refrigerant.
Remove the power steering oil pump assembly. Refer to Removal and Installation.
Remove the washer tank. Refer to Removal and Installation.
Remove bolt (A) and disconnect the internal heat exchanger (1) from the high-pressure pipe (3).

Remove bolt (A) and disconnect the high-pressure pipe (1) from the condenser pipe assembly (2).

Remove the high-pressure pipe.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?