Driver Controls
Luggage Room Lamp
In this manual: Driver Controls
~1min read
REMOVAL
Release luggage room lamp (1) pawl using a suitable tool.

: Pawl
Disconnect the harness connector from the luggage room lamp and remove.
INSTALLATION
Installation is in the reverse order of removal.
Remove luggage room lamp. Refer to Removal and Installation.
Release luggage room lamp cover (1) pawls using a suitable tool and remove from luggage room lamp (2).

: Pawl
Push tab to release one bulb end, then grasp bulb and pull out second end from its socket to remove.
Install cargo lamp bulb to cargo lamp.
Install luggage room lamp. Refer to Removal and Installation.
Was this page helpful?