Body Exterior, Doors, Roof & Vehicle Security
Moonroof Switch
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
REMOVAL
Remove map lamp assembly. Refer to Removal and Installation.
Remove center pillar upper finisher. Refer to Removal and Installation.
Remove sun visor (LH). Refer to Exploded View.
Partially lower front of headlining. Refer to Exploded View.
Using a suitable tool, release clips and pawls.

| : Clip | |
| : Pawl |
Disconnect harness connectors and remove moonroof switch.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?