Steering
Power Steering Oil Pump
In this manual: Steering
~1min read

| 1. | Power steering reservoir cap | 2. | Power steering oil pump | 3. | Low-pressure piping |
| 4. | High-pressure piping | Front |
REMOVAL
Remove the cover. Refer to Exploded View.
Drain power steering fluid. Refer to Draining and Refilling.
Disconnect the harness connectors (A) from the power steering oil pump.

Remove the harness retainer from the power steering oil pump bracket.
Remove the line retaining bolt from bracket.
Separate the-high pressure piping (2) and low-pressure piping (1) from the power steering oil pump.
Separate the clips from the power steering oil pump.
: Clip
Remove nut and bolts and remove the power steering oil pump.
INSTALLATION
Installation is in the reverse order of removal.
Bleed air from power steering system. Refer to Air Bleeding Hydraulic System.
Was this page helpful?