Steering

Steering Wheel

~1min read
Exploded View
1. Steering wheel 2. Cover 3. Steering switches
4. Driver air bag module A. Refer to Exploded View. Pawl
Removal and Installation

REMOVAL

Set the front wheels and tires in the straight-ahead position.

Remove driver air bag module. Refer to Removal and Installation.

Disconnect harness connector from steering switches.

Disconnect harness connector from steering wheel heater (if equipped).

Remove steering wheel lock nut.

Remove steering wheel using suitable tool.

If necessary, remove steering switches. Refer to Removal and Installation (NAVIGATION WITHOUT BOSE) or Removal and Installation (NAVIGATION WITH BOSE).

Inspect steering wheel near the puller holes for damage. Replace as necessary.

INSTALLATION

Installation is in the reverse order of removal.

Align spiral cable correctly before installing steering wheel. Make sure that the spiral cable is in the neutral position. Refer to Removal and Installation.

  • Do not reuse steering wheel lock nut.