Suspension

Radius Rod

~1min read
Exploded View
1. Rear suspension member 2. Radius rod 3. Rear knuckle
Front
Removal and Installation

REMOVAL

Remove the rear wheel and tire using power tool. Refer to Removal and Installation.

Support the rear knuckle with a suitable jack.

Remove the radius rod nut and bolt from the rear knuckle using power tool.

Remove the radius rod bolt from the rear suspension member using power tool.

Remove the radius rod.

INSTALLATION

Installation is in the reverse order of removal.

Perform the final tightening of the parts under unladen conditions with the tires on level ground.