Cruise Control & Driver Assistance

Right/left Switching Signal Circuit

4steps
~24min
2/5difficulty
Done 0 of 4
Work Procedure

CHECK CONNECTOR

  1. Turn the ignition switch OFF.

  2. Check the terminals and connectors of the side radar RH for damage, bend and short (unit side and connector side).

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminal or connector.

CHECK CONTINUITY OF RIGHT/LEFT SWITCHING SIGNAL CIRCUIT

  1. Disconnect side radar RH connector.

  2. Check continuity between side radar RH harness connector and ground.

Side radar RH Ground Continuity
Connector Terminal
B466 3 Yes

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair harness or connector.