Steering Vibration Motor
CHECK STEERING VIBRATION MOTOR
CONSULT
Turn the power switch ON
Select the active test item “Vibration motor” of “ICC/ADAS”.
Check the operation.
On : Steering vibration motor is activated. Off : Steering vibration motor is not activated.
Is the inspection result normal?
YES>>Inspection End
NO>>Refer to Diagnosis Procedure.
CHECK STEERING VIBRATION MOTOR CIRCUIT
Turn the power switch OFF
Disconnect the ADAS control unit and combination switch (spiral cable) connectors.
Check continuity between combination switch (spiral cable) harness connector and ADAS control unit harness connector.
Combination switch (spiral cable) ADAS control unit Continuity Connector Terminal Connector Terminal M144 19 M182 24 Yes 20 12 Check continuity between combination switch (spiral cable) harness connector and ground.
Combination switch (spiral cable) — Continuity Connector Terminal M144 19 Ground No 20
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair the harnesses or connectors.
CHECK COMBINATION SWITCH (SPIRAL CABLE)
Check for continuity between combination switch (spiral cable) terminals.
| Combination switch (spiral cable) | Continuity | |
|---|---|---|
| Terminal | ||
| 19 | 44 | Yes |
| 20 | 43 | |
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace combination switch (spiral cable).
CHECK STEERING VIBRATION MOTOR SIGNAL CIRCUIT
CONSULT
Connect the ADAS control unit and combination switch (spiral cable).
Turn the power switch ON.
Perform the active test item "Vibration motor" of "ICC/ADAS".
Check voltage between the each ADAS control unit harness connector and ground.
ADAS control unit Condition Voltage
(Approx.)Connector Terminal (+) (-) M182 12 Ground At " Vibration motor" test of "Active test" 12 V
Is the inspection result normal?
YES>>Replace the steering vibration motor. Refer to Removal and Installation.
NO>>Replace the ADAS control unit. Refer to Removal and Installation.