Engine
Spark Plug
In this manual: Engine
~1min read

| 1. | Ignition coil | 2. | Spark plug | 3. | Rocker cover (RH) |
| 4. | Rocker cover (LH) | Front |
REMOVAL
Remove the ignition coil. Refer to Removal and Installation (bank 2) and Removal and Installation (bank 1).
Remove the spark plug with Tool.
| Tool number | : — (J-48891) |

INSPECTION AFTER REMOVAL
Use the standard type spark plug for normal condition.
| Spark plug | : Refer to Spark Plug. |
| Cleaner air pressure | : less than 588 kPa (6 kg/cm2, 85 psi) |
| Cleaning time | : less than 20 seconds |
Spark plug gap adjustment is not required between replacement intervals.

Measure spark plug gap. When it exceeds the limit, replace spark plug even if it is within the specified replacement mileage. Refer to Spark Plug.
INSTALLATION
Installation is in the reverse order of removal.
| Make | DENSO |
| Standard type* | FXE22HR11 |
| Gap (nominal) | 1.1 mm (0.043 in) |
*: Always check with the Parts Department for the latest parts information.
Was this page helpful?