Engine

Warning/indicator/chime List

~2min read
Warning lamps/Indicator lamps
NameArrangement/Function
Malfunction indicator lamp (MIL) Regarding the function. Refer to Malfunction Indicator Lamp (MIL) .
Warning/Indicator (On Information Display)
NameArrangement/Function
Engine oil pressure warning Regarding the function. Refer to Engine Oil Pressure Warning.
Fuel filler cap warning Regarding the function. Refer to Fuel Filler Cap Warning.

INDICATOR/INFORMATION

NameDesignFunction

CRUISE indicator

SET indicator
System Description
Engine Oil Pressure Warning

DESIGN/PURPOSE

When engine oil pressure is low, the engine oil pressure warning informs the driver of low oil pressure to prevent damage to the engine.

SymbolMessage
  • Low oil pressure: See owner′s Manual

BULB CHECK

Not applicable

OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL

For the operation for CAN communications blackout or abnormal signal reception, refer to Fail-safe.

SYSTEM DIAGRAM

SIGNAL PATH

ECM calculates an engine oil pressure according to a signal transmitted from the engine oil pressure sensor. After engine running when the engine oil pressure is low and at least 5 seconds, ECM transmits the engine oil pressure warning signal to combination meter via CAN communication. Then the engine oil pressure warning displays.

LIGHTING CONDITION

When all of the following conditions for at least 5 seconds are satisfied:

  • Ignition switch: ON

  • Engine oil pressure is less than specified value.

  • Engine speed is more than 500 rpm.

SHUTOFF CONDITION

When any of the following conditions is satisfied:

  • Ignition switch: OFF

  • Engine oil pressure is the specified value or more.

  • Engine speed is less than 500 rpm.

TIMING CHART

Fuel Filler Cap Warning

DESIGN/PURPOSE

Warn the driver that the fuel filler cap is left opened.

SymbolMessage
Loose Fuel Cap

For detailes, refer to System Description.