Windshield Glass

| 1. | Spacer | 2. | Windshield glass molding | 3. | Windshield glass |
| 4. | Roof | 5. | Headlining | 6. | Cowl top cover |
| 7. | Body side outer | 8. | Front pillar finisher | D. | Adhesive |
| E. | 12 mm (0.47 in) | F. | 7.0 mm (0.28 in) | G. | Primer |
| H. | 16 mm (0.63 in) | J. | 25 mm (0.98 in) |
REMOVAL
Remove inside mirror. Refer to Removal and Installation.
Remove headlining (front edge). Refer to Removal and Installation.
Remove cowl top cover. Refer to Removal and Installation — Cowl Top Cover.
Remove front pillar finishers (LH/RH). Refer to Removal and Installation.
Remove windshield glass using piano wire or power cutting tool (A) and an inflatable pump bag (B).

Apply protective tape around the windshield glass to protect the painted surface from damage.
If the windshield glass is to be reused, mark the body and the glass with matching marks.
INSTALLATION
Installation is in the reverse order of removal.
Use a Genuine NISSAN Urethane Adhesive Kit (if available) or equivalent and follow the instructions furnished with it.
Adhesive shall be continuously applied to assure watertightness. Glass installation must be finished within five minutes after applying the adhesive.
While the urethane adhesive is curing, open a door window. This will prevent the glass from being forced out by passenger compartment air pressure when a door is closed.
The molding must be installed securely so that it is in position and leaves no gap.
Inform the customer that the Nissan Murano vehicle should remain stationary until the urethane adhesive has completely cured (preferably 24 hours). Curing time varies with temperature and humidity.
REPAIRING WATER LEAKS FOR WINDSHIELD
Leaks can be repaired without removing and reinstalling glass.
If water is leaking between the urethane adhesive material and body or glass, determine the extent of leak.
This can be done by applying water to the windshield area while pushing glass outward.
To stop the leak, apply primer (if necessary) and then urethane adhesive to the leak point.