Electric windows

The system is designed for manual or automatic closing of the windows.

Models with sequential mode are equipped with an anti-trapping system, and all models are equipped with a system that disables the rear window switches if they are used incorrectly.

1. 1
   Driver's electric window switch.
2. 2
   Passenger's electric window switch.
3. 3
   Rear right electric window switch.
4. 4
   Rear left electric window switch.
5. 5
   Rear window lift lockout.

Electric windows

Press the switch or pull it towards you. The window stops when the switch is released.

Window switches remain active for about 45 seconds after the ignition is switched off or until the front door is opened.

Sequential electric windows

There are two possibilities:

manual mode

• Press the switch or pull it without passing the resistance point.

  The window stops when the switch is released.

automatic mode

• Press the switch or pull it past the resistance point.

  The window opens or closes fully after the switch is released.

• Pressing again stops the window movement.

Electric windows remain active for about 45 seconds after the ignition is switched off or until the front door is opened.

Anti-trapping system

If a window in automatic mode meets resistance (an obstacle), it stops immediately and partially lowers.

If a window unexpectedly lowers while closing (for example, in freezing conditions):

• press the control button to fully open it,
• then pull it until fully closed.
• hold the button for about one second after the window is closed.

During this operation, the anti-trapping function is inactive.

Disabling the rear window switches

To ensure child safety, press switch 5 to disable the rear window switches regardless of their position.

Pressing the button disables the window lifts.

After the button is released, the window lifts are enabled.

Restoring operation

If the system does not work correctly after reconnecting the battery, reinitialise the window lifts:

• release the control button and press it again until the window is fully closed,
• hold for one second after closing,
• press the switch to lower the window automatically,
• once the window is fully lowered, press the switch again and hold it for about 1 second.

During this operation, the anti-trapping function is inactive.

Always remove the key from the ignition when leaving the vehicle, even briefly. If the window becomes trapped while operating the window lift, reverse its direction by pressing the corresponding switch. If the driver operates a passenger window lift, make sure nothing prevents the window from closing properly. The driver should make sure passengers use the window lifts correctly.

When operating electric windows, pay particular attention to children.