Renault Kangoo Quiz
Diagnostic

Help

In this manual: Diagnostic
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

USING THE COMMANDED MODES:

Solenoid valve control for hydraulic check: G03* to G06*

Raise the vehicle so that the wheels can be turned and check that they turn freely.

Keep the brake pedal pressed to prevent the wheel under test from turning when turned by hand (do not brake too hard, stay at the point where the brake releases).

Activate G0X*constater dix cycles déblocage / blocage sur la roue concernée.Ten release / lock cycles must be seen on the wheel concerned.

Pump motor control: G08*

Activate G08* and press the brake pedaldu moteur pendant 2 secondes.The motor must be seen running for 2 seconds.

Pump motor and solenoid valve control: G20*

Activate G20* and press the brake pedaldu moteur et des électrovannes.A brief operation of the motor and solenoid valves must be seen.

Bleeding the hydraulic circuits: G15*3* front left / G15*4* front right / G15*5* rear left / G15*6* rear right

Apply the procedure described in the "Bleeding the circuits" chapter of the Repair Manual.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.