Engine and peripherals
Intake manifold
In this manual: Engine and peripherals
~1min read
D7F engine

Removal and refitting present no particular points.
E7J Engine

REMOVAL
Remove:
- the air filter,
- the fuel rail (see chapter 13).
Raise the vehicle.
Remove the bracket (1) (to access the bracket bolt on the right side of the vehicle, remove the mudguard and right wheel).

Lower the vehicle.
Remove the air duct (A) connecting the throttle body to the air filter.

Disconnect the accelerator cable and the electrical connectors (2) on the throttle body.
Remove the bolts and nuts (3) securing the manifold.

Remove the two bolts (4) securing the mounting bracket to the cylinder block.

Remove the manifold.
INSTALLATION
Replace the intake manifold gaskets.
To refit, reverse the removal procedure.
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?