Renault Kangoo Quiz
Diagnostic

Preliminary information

In this manual: Diagnostic
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

CONDITIONS FOR APPLYING THE CHECKS DEFINED IN THIS DIAGNOSIS

The checks defined in this diagnosis should only be applied on the vehicle if the fault description exactly matches the display seen on the XR25 tester when the ignition is switched on.

If a fault is being dealt with for a flashing bar graph indication, the conditions for confirming that the fault is actually present (and the need to apply the diagnosis) are given in the "Instructions" box or at the start of the bar graph interpretation.

If a bar graph is only interpreted when it is steady on, applying the checks recommended in the diagnosis when the bar graph is flashing will not locate the origin of the fault being stored. In this case, only a check of the wiring and connectors of the component concerned should be carried out (the fault is simply stored because it was not present at the time of the check).

NOTE: The ignition must have been switched off before using the XR25 tester.

TOOLS REQUIRED FOR WORK ON THE DIGITAL DPC INJECTION SYSTEM

  • XR25 tester.

  • XR25 cassette No. 17 minimum.

  • 25-way test connector block Elé. 1332 for work at the ECU connector.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.