Renault Megane Quiz
Bodywork

Front jack support

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is a basic operation for a lower side impact.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Note: Welds must be made by plug welding.

REPLACEMENT PART CONTENTS

Part supplied alone.

Appui de cric avant

PARTS CONCERNED (thickness in mm):

  1. Front jack support 1.8

PART IN POSITION

3 and 5 door versions

Appui de cric avant

Note: There is no specific feature when replacing this part.

Align the jack support along the front and rear marks (B). Match the edge of the support with the edge of the body side at (A).

The method for replacing the rear jack support on 3 and 5 door versions is identical to the front jack support.

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.