Chassis
Bulkhead seal
In this manual: Chassis
~1min read
Essential equipment |
| steering wheel lock |
REMOVAL

- Centre the vehicle between the two posts of a lift.
- Set the wheels straight.
- Centre the steering wheel.
- Remove, inside the passenger compartment:
- the bolt,
- the cam nut of the folding clamp.
- Fit the steering wheel lock.
- Position the vehicle on a two-post lift.
- Remove the battery cover.
- Disconnect the battery, starting with the negative terminal.
- Remove the subframe (Chapter Front load-bearing components, Subframe, page 31A-23).
- Unclip the bulkhead seal using a screwdriver.
INSTALLATION
- Refit in the reverse order of removal.
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?