Electrical equipment
Protection and switching unit
In this manual: Electrical equipment
~1min read
Essential equipment |
| diagnostic tool |
Be sure to record the configurations of the protection and switching unit using the diagnostic tool.
REMOVAL

- Remove the engine covers.
- Disconnect the battery.
- Remove:
- the battery,
- the upper part of the interconnection box,
- the screw (1).
- Disconnect the connectors (2).

- Disconnect the remaining connectors.
Note: To unlock connector (3), operate the lock (4).
INSTALLATION
- Refit in the reverse order of removal.
The alternator type must be configured when replacing the protection and switching unit (see Chapter Starting - Charging).
CONFIGURATION
- Alternator type: CF001
- KCB1 90BOSCH
- TG11 110 VALEO
- SG12 VALEO
- LIE8 150 BOSCH
- SG15L VALEO
- OTHER TYPES
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?