Front Lower Arm Repair Procedures

Replacement

1. 1
   Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the wheel cap (A).

   

   Be careful not to damage the wheel cap (A) when removing it.

3. 3
   Remove the front wheel and tire (A) from the front hub.

   

   Be careful not to damage the hub bolts when removing the front wheel and tire (A).

4. 4
   Remove the lower arm (A).

   1. Remove the cotter pin (B).
   2. Loosen the nut and mounting bolt.

      Tightening torque: 98.1 ~ 118 N·m

      

5. 5
   Remove the front lower arm (A) and loosen the bolts and nuts. Tightening torque: Front: 117.7 ~ 137 N·m Rear: 156.9 ~ 176 N·m (16.0 ~ 18.0 kgf·m, 115.7 ~ 130.2 ft-lbf)

   

   

6. 6
   Installation is the reverse of removal.

Inspection

1. 1
   Inspect the bushing for wear and damage.
2. 2
   Inspect the front stabilizer bar for deformation.
3. 3
   Check all bolts and nuts.