Hyundai Sonata LF Quiz
Body (Interior and Exterior)

Hood Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 90Engine Electrical System — 58Emission Control System — 24Engine Control System/Fuel System — 114Drive Shaft and Axle — 15Suspension System — 35Steering — 19Restraints — 50Brake System — 54Body (Interior and Exterior) — 213Body Electrical System — 241Heating, Ventilation, and Air Conditioning — 56DCT (Dual Clutch Transmission) System — 52
2steps
~12min
1/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Replacement
  • Be careful not to damage the hood and body.
  • An assistant is required when removing and installing the hood.
  1. After removing the hood hinge mounting bolts (A), remove the hood assembly (B).

    Tightening torque: 21.6 ~ 26 N·m

  2. Install in the reverse order of removal.
    • Make sure the hood latches/unlatches and opens/closes properly.
    • Adjust the hood alignment.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.