Body Electrical System
Power Seat Memory Switch Repair Procedures
In this manual: Body Electrical System
9steps
~54min
2/5difficulty
Done 0 of 9
Removal
- Disconnect the negative (-) battery terminal.
- Remove the driver door trim panel. (Refer to Body - "Front Door Trim Panel")
- Disconnect the power seat memory switch connector (A).

- Remove the power seat memory switch (A) after loosening the mounting screws.

Installation
- Install the power seat memory switch (IMS).
- Install the door trim panel.
- Connect the negative (-) battery terminal.
Inspection
- Disconnect the power seat memory connector.

- When pressing each switch, check the power supply between the power seat memory switch connector and ground. If the voltage does not meet the specification, replace the switch.

Test yourself
A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?