Radiator Grille Repair Procedures

Replacement

Wear gloves to protect your hands.

When prying with a flat-tip screwdriver or a trim tool, wrap the tool with protective tape and apply protective tape to the surrounding parts to prevent damage. Use a plastic panel removal tool to remove the interior trim parts so as not to damage the surface. Be careful not to bend or scratch the trim and panels.

1. 1
   Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover")
2. 2
   Remove the mounting clip (A), then remove the front bumper absorber (B).

   

3. 3
   Remove the panoramic camera. (Refer to Body Electrical System - "Panoramic Camera".)
4. 4
   Loosen the radiator grille mounting screws.
5. 5
   Release the stopper pins by pressing them with a screwdriver or trim remover, then remove the radiator grille (A).

   

6. 6
   Install in the reverse order of removal.

   Replace any damaged clips.