Hyundai Sonata LF Quiz
Body (Interior and Exterior)

Rear Console Cover Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 90Engine Electrical System — 58Emission Control System — 24Engine Control System/Fuel System — 114Drive Shaft and Axle — 15Suspension System — 35Steering — 19Restraints — 50Brake System — 54Body (Interior and Exterior) — 213Body Electrical System — 241Heating, Ventilation, and Air Conditioning — 56DCT (Dual Clutch Transmission) System — 52
3steps
~18min
2/5difficulty
Done 0 of 3

Replacement
  • Wear gloves to protect your hands.
  • When prying with a flat-tip screwdriver or a trim tool, wrap the tool with protective tape and apply protective tape to the surrounding parts to prevent damage.
  • Use a plastic panel removal tool to remove the interior trim parts so as not to damage the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Using a screwdriver or remover, remove the rear console cover (A).
  2. Disconnect the connector (A).
  3. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace any damaged clips.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.