Body (Interior and Exterior)

Rear Seat Assembly Repair Procedures

9steps
~54min
2/5difficulty
Done 0 of 9

Replacement

[Rear Seat Cushion Assembly]
  1. Remove the rear seat cushion assembly (A).
    Rear Seat Cushion Separation Method
    1. Remove the rear seat cushion by pulling it upward.
    2. Remove the rear seat cushion by pulling it upward and pushing it rearward.
  2. Disconnect the seat cushion heater connector (A). [LH]
    [RH]
  3. Install in the reverse order of removal.
    • Make sure the connector is properly connected.

[Rear Seat Back Assembly]

  1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Loosen the mounting bolts, then remove the rear side cover (A).
  3. Loosen the mounting bolts, then remove the [RH] rear seat belt buckle (A).
  4. Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.
  5. Loosen the mounting bolts, then remove the rear seatback assembly (A).
  6. Install in the reverse order of removal.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.