Body (Interior and Exterior)
Sunshade Repair Procedures
In this manual: Body (Interior and Exterior)
12steps
~72min
3/5difficulty
Done 0 of 12
Removal
- Open the sunshade using the panoramic sunroof switch.

- Leave 10 ~ 20 cm (0.3937 ~ 0.7874 in.) of the sunshade unopened.

- Remove the headliner. (Refer to Headliner - "Headliner Assembly")
- Remove the sunshade rod (C) by pressing the upper part of the stopper pin (B) located on both sides of the roller blind shoe (A).

- Insert the fixing pin (B) into the hole located inside the groove of the right side roller blind bracket (A). Be careful not to release the tension.

- Remove the blind lower support (A) by loosening the mounting screws.

Installation
- Install the blind side bracket (A) into the guide slot (B).

- Tighten the mounting screws after installing the blind lower support (A).

- Remove the fixing pin (B) located inside the right side roller blind bracket (A).

- Install the sunshade rod (A) over the sunshade shoe (B).

- Insert the sunshade rod (A) into the sunshade shoe (B).

- Install the headliner.
- Fully close the sliding glass using the sunroof switch.
Test yourself
A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?