Hyundai Sonata LF Quiz
DCT (Dual Clutch Transmission) System

Special Service Tools

In this manual: DCT (Dual Clutch Transmission) System
General Information — 9Engine Mechanical System — 90Engine Electrical System — 58Emission Control System — 24Engine Control System/Fuel System — 114Drive Shaft and Axle — 15Suspension System — 35Steering — 19Restraints — 50Brake System — 54Body (Interior and Exterior) — 213Body Electrical System — 241Heating, Ventilation, and Air Conditioning — 56DCT (Dual Clutch Transmission) System — 52
~1min read
8special tools

Special Service Tools

Tool
(Number and Name)		 Illustration Use
09200-3N000
Engine Support Bracket
(Beam)
Transmission removal and installation.
Use this beam (SST No.: 09200-3N000) with the supporter (SST No.: 09200-2S000).
?Refer to 09200-38001 for permission to use.
?Refer to the engine mounting bracket assembly drawing below.
09200-2C000
Engine Mount Bracket
(Support)
Transmission Removal and Installation.
Use this beam (SST No.: 09200-38001/3N000) with the support (SST No.: 09200-2S000).
Refer to the engine mount bracket illustration below.
09430-C1190
Oil Seal Installer
Installation of differential oil seal into transmission case and case side.
[Use with shaft (SST No. 09231-H1100)]
09231-H1100
Bar
Installation of differential oil seal into transmission case and case side.
[Use with oil seal installer (SST No.: 09430-C1190)]
09480-A3800
Inhibitor Switch Neutral Fixing Pin
Used to align the neutral position when installing the manual control lever on the inhibitor switch.
09430-C1180
Dual Clutch Remover
Used to remove the dual clutch assembly.
09430-2A240
Dual Clutch Installer
Used to install the dual clutch assembly.
09430-C1300
Clutch Wear Compensation Tool
Used to adjust the clutch actuator.
Used with the clutch actuator adjusting tool (09430-C1302)
09430-C1302
Actuator Fixing Jig and Engine Shaft Reset Tool
Used to adjust the clutch actuator.
Used with the clutch actuator adjuster (09430-C1300)
09430-A5100
Clutch Release Fork Retainer
Used to remove the clutch actuator assembly.

? Special service tool assembly drawing for engine mounting bracket
1. 09200-3N000 (Main Bar)
2. 09200-3N000 (Sub Bar)
3. 09200-3N000 (Handle)
4. 09200-3N000 (Plug)
5. 09200-3N000 (Plug)
6. 09200-3N000 (Handle)
7. 09200-3N000 (Adapter)
8. 09200-2C000 (Support)
9. 09200-3N000 (Hanger)		 10. 09200-3N000 (Clip)
11. 09200-3N000 (Nut)
12. 09200-3N000 (Pin)
13. 09200-2C000 (Plug)
14. 09200-2C000 (Spacer)
15. 09200-2S000 (Adapter)
16. 09200-2S000 (Support)
17. 09200-2C000 (Nut)

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.