Hyundai Sonata LF Quiz
Brake System

Steering Angle Sensor Repair Procedures

In this manual: Brake System
General Information — 9Engine Mechanical System — 90Engine Electrical System — 58Emission Control System — 24Engine Control System/Fuel System — 114Drive Shaft and Axle — 15Suspension System — 35Steering — 19Restraints — 50Brake System — 54Body (Interior and Exterior) — 213Body Electrical System — 241Heating, Ventilation, and Air Conditioning — 56DCT (Dual Clutch Transmission) System — 52
4steps
~24min
2/5difficulty
Done 0 of 4

Adjustment

Calibration (Zero Angle Setting) The absolute type (CAN type) steering wheel angle sensor measures the angle based on the zero angle reference. Calibration must be performed in the following cases.
  • Steering Angle Sensor Replacement
  • Steering Column Replacement or Repair
  • DTC (C1260, C1261) Detection
  • Sensor Block Replacement
  • HECU Replacement
Calibration Procedure Perform a wheel alignment and set the steering wheel to the straight-ahead position within ±5°.
  1. Connect GDS. (CAN line or OBD connector)
  2. Turn the ignition on.
  3. Press the steering angle sensor calibration button.
  4. Perform the SAS calibration procedure. (Calibration records, DTC clearing)

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.