General information
Clutch cable play inspection and adjustment
In this manual: General information
8steps
~48min
2/5difficulty
Done 0 of 8
Inspect clutch cable play every 6 000 km (4 000 miles, 12 months)



Inspect and adjust the clutch cable play “a” as follows.
Clutch cable play “a” 10 – 15 mm (0.4 – 0.6 In)
- Lift and support the fuel tank. Refer to “fuel tank removal and installation” in section 1g (page 1g- 9).
- Turn in the adjuster (1) all the way into the clutch lever assembly.

- Loosen the lock-nut (2) and turn the clutch cable adjuster (3) to obtain proper cable play.

- Remove the clutch release adjuster cap (4).
- Loosen the lock-nut (5) and turn out the clutch release adjusting screw (6) two or three rotations.
- From that position, slowly turn in the clutch release adjusting screw (6) until resistance is felt.
- From this position, turn out the clutch release adjusting screw (6) 1 rotation, and tighten the locknut (5) while holding the screw (6).

- Turn the cable adjuster (3) to obtain 10 – 15 mm (0.4 – 0.6 In) of free play “a” at the clutch lever end.
- Tighten the lock-nut (2).

- Install the clutch release adjuster cap (4).
- Reinstall the fuel tank.
Test yourself
A quick Suzuki GSX-R 1000 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?