Suzuki GSX-R 1000 Quiz
Brake

Rear brake hose removal and installation

In this manual: Brake
Foreword — 1Precautions — 15General information — 44Engine — 269Suspension — 52Driveline / axle — 13Brake — 51Transmission / transaxle — 34Steering — 15Body and accessories — 68
4steps
~24min
2/5difficulty
Done 0 of 4
Removal
  1. Drain brake fluid. Refer to “brake fluid replacement” .
  2. Remove the rear brake hoses as shown in the rear brake hose routing diagram. Refer to “rear brake hose routing diagram” .
Installation Caution

the seal washers should be replaced with new ones to prevent fluid leakage.

  1. Install the rear brake hose as shown in the rear brake hose routing diagram. Refer to “rear brake hose routing diagram” .
  2. Bleed air from the rear brake system. Refer to “air bleeding from brake fluid circuit” .

Test yourself

A quick Suzuki GSX-R 1000 quiz: every answer comes with an explanation and a link to the manual page.