Suzuki GSX-R 1000 Quiz
Engine

Regulator / rectifier removal and installation

In this manual: Engine
Foreword — 1Precautions — 15General information — 44Engine — 269Suspension — 52Driveline / axle — 13Brake — 51Transmission / transaxle — 34Steering — 15Body and accessories — 68
6steps
~36min
2/5difficulty
Done 0 of 6
Removal
  1. Turn the ignition switch off.
  2. Remove the right side cowling. Refer to “exterior parts removal and installation” in section 9d .
  3. Lift and support the fuel tank. Refer to “fuel tank removal and installation” in section 1g (page 1g- 9).
  4. Remove the evap system purge control solenoid valve bracket bolt. (E-33 only)
    Suzuki GSX-R. Regulator / rectifier removal and installation

  1. Disconnect the regulator/rectifier couplers (1).
Suzuki GSX-R. Regulator / rectifier removal and installation

  1. Remove the regulator/rectifier as shown in the regulator/rectifier construction. Refer to “regulator / rectifier construction” .
Installation
  1. Install the regulator/rectifier as shown in the regulator/rectifier construction. Refer to “regulator / rectifier construction” .
  2. Reinstall the removed parts.

Test yourself

A quick Suzuki GSX-R 1000 quiz: every answer comes with an explanation and a link to the manual page.