Suzuki Swift: Lifting the vehicle

1
Park the vehicle on a level, firm surface.
2
Apply the parking brake firmly and select position "P" (Park) in an automatic transmission or "R" (Reverse) in a manual transmission. Place wheel chocks in front of and behind the wheel diagonally opposite the one being lifted.
3
Turn on the hazard warning lights if there is traffic nearby.
4
Position the jack vertically and raise it by turning the handle clockwise until the notch in the jack head engages the flange on the side member.

Raise the vehicle slowly and smoothly until the tyre lifts off the ground. Do not raise the vehicle any higher than necessary.

WARNING

Use the jack only for changing wheels.
Never lift the vehicle on a slope.
Never lift the vehicle with the jack placed anywhere other than under the flange on the body side member near the wheel being changed.
Make sure the jack is raised at least 5 cm before it contacts the flange on the side member. Using the jack when it is extended less than 5 cm from its fully collapsed position may cause it to fail.
Never get under a vehicle supported only by a jack.
Do not start the engine with the vehicle raised, and never allow passengers to remain in it.

Lifting the vehicle