Front Passenger Side Power Window Switch

Components COMPONENTS ILLUSTRATION
Inspection INSPECTION PROCEDURE

1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Switch Condition Specified Condition 6 (UP) - 1 (GND) Manual up operation Below 1 Ω 7 (DOWN) - 1 (GND) Manual down operation Below 1 Ω 8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω 6 (UP) - 1 (GND) Not operated 10 kΩ or higher 7 (DOWN) - 1 (GND) Not operated 10 kΩ or higher 8 (AUTO) - 1 (GND) Not operated 10 kΩ or higher If the result is not as specified, replace the power window regulator switch assembly.

(b) Check that the LED illuminates.

(1) Apply battery voltage to the power window regulator switch and check that the LED illuminates.

OK:

Measurement Condition	Specified Condition
Battery positive (+) → 4 (LED) Battery negative (-) → 1 (GND)	LED illuminates

• If the result is not as specified, replace the power window regulator switch assembly.

Text in Illustration

*1	LED
*a	Front view of wire harness connector (Power Window Regulator Switch Assembly)

Removal REMOVAL PROCEDURE

1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH

2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL RH

3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH

4. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP RH

5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY

(a) Detach the 10 claws from the backside and remove the power window regulator switch with base panel.

(b) Disconnect the connectors.

(c) Detach the 2 claws and remove the power window regulator switch.

Installation INSTALLATION PROCEDURE

1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY

(a) Attach the 2 claws to install the power window regulator switch.

(b) Connect the connectors.

(c) Attach the 10 claws to install the power window regulator switch with base panel.

2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP RH

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH

4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL RH

5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH RH