Inspection

1. INSPECT REAR DOOR LOCK ASSEMBLY LH

(a) Check the door lock motor operation.

(1) Apply battery voltage to the door lock motor and check the operation of the door lock motor. OK: Measurement Condition Specified Condition Battery positive (+) → 4 (L) Battery negative (-) → 1 (UL) Lock Battery positive (+) → 1 (UL) Battery negative (-) → 4 (L) Unlock If the result is not as specified, replace the rear door lock assembly. Text in Illustration *a Component without harness connected (Rear Door Lock Assembly LH) *b Lock *c Unlock

(b) Check the detection switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

If the result is not as specified, replace the rear door lock assembly.

2. INSPECT REAR DOOR LOCK ASSEMBLY RH

(a) Check the door lock motor operation.

(1) Apply battery voltage to the door lock motor and check the operation of the door lock motor. OK: Measurement Condition Specified Condition Battery positive (+) → 4 (L) Battery negative (-) → 1 (UL) Lock Battery positive (+) → 1 (UL) Battery negative (-) → 4 (L) Unlock If the result is not as specified, replace the rear door lock assembly. Text in Illustration *a Component without harness connected (Rear Door Lock Assembly RH) *b Unlock *c Lock

(b) Check the detection switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

If the result is not as specified, replace the rear door lock assembly.