Installation

1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Install the windshield washer motor and pump assembly to the packing of the washer jar.

2. INSTALL WASHER JAR

(a) Attach the guide to install the washer jar, and then install the 3 screws. HINT: Tighten the screws in the order shown in the illustration. Torque: 5,5 N·m {56 kgf·cm, 49 in·lbf}

3. INSTALL WASHER INLET SUB-ASSEMBLY

(a) Install the clip to the washer inlet sub-assembly.

4. FILL WINDSHIELD WASHER FLUID

(a) Connect the washer hose to the hose of the windshield washer motor and pump assembly and fill the washer jar with windshield washer fluid.

5. INSTALL FRONT FENDER LINER RH

(See page )

6. INSTALL FRONT BUMPER COVER (w/ Intuitive Parking Assist System)

(See page )

7. INSTALL FRONT BUMPER COVER (w/o Intuitive Parking Assist System)

(See page )

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

9. ADJUST FOG LIGHT AIMING

(See page )