Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE FRONT BUMPER COVER (w/o Intuitive Parking Assist System)

(See page )

3. REMOVE FRONT BUMPER COVER (w/ Intuitive Parking Assist System)

(See page )

4. REMOVE FRONT FENDER LINER RH

(See page )

5. DRAIN WINDSHIELD WASHER FLUID

(a) Disconnect the washer hose from the hose of the windshield washer motor and pump assembly and drain the windshield washer fluid.

6. REMOVE WASHER INLET SUB-ASSEMBLY

(a) Detach the clip and remove the washer inlet sub-assembly.

7. REMOVE WASHER JAR

(a) Disconnect the connector.

(b) Remove the 3 screws.

(c) Detach the guide to remove the washer jar.

8. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Remove the windshield washer motor and pump assembly from the packing of the washer jar. Text in Illustration *1 Packing