Making a phone call

Making a phone call • Dialing by inputting a number “Dial by Number” • Dialing by inputting a name “Dial by Name (Dial by name)” • Speed dialing
• Dialing a number stored in the outgoing history memory “Redial”
• Dialing a number stored in the incoming history memory “CallBack (Callback)” Receiving a phone call • Answering a phone call • Refusing a phone call Transferring a phone call Using the call history memory • Dialing
• Storing data in the phone book

• Deleting

Dialing by inputting a number

Press the talk switch and say
“Dial by number”.

Press the talk switch and say the
phone number.

Dial by one of the following
methods:

a. Press the off-hook switch.

b. Press the talk switch and say “Dial”.

c. Select “Dial” using .

Dialing by inputting a name

Press the talk switch and say
“Dial by name”.

Select a registered name to be
input by either of the following methods:

a. Press the talk switch and say a registered name.

b. Press the talk switch and say “List names”. Press the talk switch while the desired name is being read aloud.

Dial by one of the following
methods:

a. Press the off-hook switch.

b. Press the talk switch and say “Dial”.

c. Select “Dial” using .

Speed dialing

Press the off-hook switch.

Press the preset button to which
the desired number is registered.

Press the off-hook switch.

When receiving a phone call Answering a phone call

Press the off-hook switch.

Refusing a phone call

Press the on-hook switch.

Transferring a phone call

A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the operation of the phone.

b. Press the off-hook switch*1.

c. Press the talk switch and say “Call transfer”*2.

*1: This operation can be performed only when transferring a call from the cellular phone to the system during a call.

*2: While the vehicle is in motion, a call cannot be transferred from the system to the cellular phone. Also, this operation is invalid while dialing or receiving a call.

Using the call history memory

Follow the procedure below to use a number stored in the call history memory:

Press the talk switch and say
“Redial” (when using a number stored in the outgoing call history memory) or “Callback” (when using a number stored in the incoming call history memory).

Select the number by either of
the following methods:

a. Say “Previous” or “Go back” until the desired number is displayed.

b. Select the desired number using .

The following operations can be performed:

Dialing: Press the off-hook switch or select “Dial” using a voice command or .

Storing the number in the phone book: Select “Store” using a voice command or .

Deleting: Select “Delete” using a voice command or .

Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call history memories.

When talking on the phone

• Do not talk at the same time as the other party.

• Keep the volume of the incoming voice down. Otherwise, voice echo will increase.