Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

3. REMOVE COWL SIDE TRIM BOARD RH

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

5. REMOVE LOWER INSTRUMENT COVER LH

6. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

7. REMOVE INSTRUMENT PANEL BOX DOOR COVER

8. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

9. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY

10. REMOVE ECU INTEGRATION BOX RH

(a) Disconnect the connectors and detach the clamp.

(b) Remove the 2 nuts, bolt and the certification ECU with seat belt control ECU.

11. REMOVE CERTIFICATION ECU

(a) Detach the 2 claws and remove the certification ECU.