Rocker Panel Moulding

Components COMPONENTS ILLUSTRATION
Removal REMOVAL CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step)

(See page )

2. REMOVE ROCKER PANEL MOULDING LH

(a) Remove the 7 retainers, clip and screw.

(b) Put protective tape around the rocker panel moulding LH.

(c) Remove the 2 screws.

(d) Detach the 7 clips to remove the rocker panel moulding LH.

Text in Illustration

*1

Protective Tape

-

-

3. REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR (w/o Side Step)

(a) Remove the 2 screws and No. 2 rocker panel moulding protector.

Installation INSTALLATION CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR (w/o Side Step)

(a) Install the No. 2 rocker panel moulding protector with the 2 screws.

2. INSTALL ROCKER PANEL MOULDING LH

(a) Attach the 7 clips to install the rocker panel moulding LH.

(b) Install the 3 screws.

(c) Attach the 7 retainers and clip.

3. INSTALL SIDE STEP ASSEMBLY LH (w/ Side Step)

(See page )