Rocker Panel Moulding(w/ Intuitive Parking Assist System)

Components COMPONENTS ILLUSTRATION
Installation INSTALLATION CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL NO. 6 ROCKER PANEL REINFORCEMENT

(a) Install the No. 6 rocker panel reinforcement with the 6 bolts.

Torque:

20 N·m {204 kgf·cm, 15 ft·lbf}

2. INSTALL ROCKER PANEL MOULDING LH

(a) Attach the 15 clips to install the rocker panel moulding LH.

(b) Install the 4 screws.

3. INSTALL FRONT FENDER MUDGUARD LH

Removal REMOVAL CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT FENDER MUDGUARD LH

2. REMOVE ROCKER PANEL MOULDING LH

(a) Put protective tape around the rocker panel moulding LH.

(b) Remove the 4 screws.

(c) Detach the 15 clips to remove the rocker panel moulding LH.

Text in Illustration

*1

Protective Tape

-

-

3. REMOVE NO. 6 ROCKER PANEL REINFORCEMENT

(a) Remove the 6 bolts and No. 6 rocker panel reinforcement.