Toyota 4Runner Quiz
Vehicle Interior

Transponder Chip Malfunction (B2793-B2795)

In this manual: Vehicle Interior
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
DESCRIPTION
  • DTC B2793 is stored when a malfunction is found in the key during key code registration or a key code is not registered normally. Replace the key if key code registration cannot be performed normally and this DTC is output.
  • DTC B2794 is stored when a key with an incomplete key code is inserted into the ignition key cylinder.
  • DTC B2795 is stored when a key with a key code that is not registered in the ECU is inserted into the ignition key cylinder.

DTC Code

DTC Detection Condition

Trouble Area

B2793

A transponder chip malfunction.

Key

B2794

A key with an incomplete key code is inserted into the ignition key cylinder.

B2795

A key with an unregistered key code is inserted into the ignition key cylinder.
CAUTION / NOTICE / HINT

NOTICE:

When the key is replaced, refer to Registration (See page ).


PROCEDURE

  1. REREGISTER KEY

(a) Clear the DTCs (See page ).


(b) Reregister the key code with the transponder key ECU assembly.

(c) Check that the engine starts with the key.

OK:

Engine starts.


OK

END

NG

REPLACE KEY

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.