Axle and Differential

Front Axle Hub Bolt

~3min read
1special tools
0408012016020010779N·mlb·ft
Tightening torque found on this page

Components

COMPONENTS

ILLUSTRATION

*1

FRONT AXLE HUB BOLT

*2

FRONT DISC

*3

FRONT DISC BRAKE CALIPER ASSEMBLY

-

-

Torque for "Main Areas Related to Basic Vehicle Performance" such as Driving/Turning/Stopping: N*m (kgf*cm, lbf*ft)

●

Non-reusable part

Replacement

REPLACEMENT

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. REMOVE FRONT WHEEL

Click here

2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY

(a) Remove the 2 bolts and disconnect the front disc brake caliper assembly from the steering knuckle.

NOTICE:

Using a wire or equivalent tool, suspend the front disc brake caliper assembly to prevent it from hanging by the front brake hose.

3. REMOVE FRONT DISC

Click here

4. REMOVE FRONT AXLE HUB BOLT

(a) Temporarily install 2 nuts onto the front axle hub bolts as shown in the illustration.

Recommended lock nut:

Thread diameter: 12.0 mm (0.472 in.)

Thread pitch: 1.5 mm (0.0591 in.)

NOTICE:

Reinstall the nuts to prevent damage to the front axle hub bolts.

*a

Lock nut

*b

Hold

*c

Turn

(b) While holding the front axle hub subassembly with the SST and a screwdriver or equivalent tool, remove the front axle hub bolt.

SST: 09611-12010

NOTICE:

Do not damage the threads of the front axle hub bolts.

5. INSTALL FRONT AXLE HUB BOLT

(a) Temporarily install a new front axle hub bolt onto the front axle hub subassembly.

(b) Install a washer and a acorn nut onto the front axle hub bolt as shown in the illustration.

Recommended lock nut:

Thread diameter: 12.0 mm (0.472 in.)

Thread pitch: 1.5 mm (0.0591 in.)

HINT:

Recommended washer thickness: 5 mm (0.197 in.) minimum.

*a

Lock nut

*b

Washer

*c

Hold

*d

Turn

(c) Using a screwdriver or equivalent tool to hold the front axle hub subassembly, install the front axle hub bolt by tightening the acorn nut.

NOTICE:

  • Reinstall the nuts to prevent damage to the front axle hub bolts.
  • Do not damage the threads of the front axle hub bolts.

(d) Remove the 3 nuts and washer from the 3 front axle hub bolts.

6. INSTALL FRONT DISC

Click here

7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

(a) Install the front disc brake caliper assembly onto the steering knuckle with the 2 bolts.

Torque:

107 N·m {1 091 kgf·cm, 79 ft·lbf}

NOTICE:

  • When installing the front disc brake caliper assembly, be careful not to twist the front brake hose.
  • Make sure there are no foreign objects on the bolt threads.

8. INSTALL FRONT WHEEL

Click here