Rear Suspension
Disposal
In this manual: Rear Suspension
~1min read
DISPOSAL
PROCEDURE
1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY
(a) Extend the piston rod and secure the rear shock absorber assembly diagonally in a vise. |
![]() |
(b) Using a hacksaw, slowly cut a hole at the location indicated by the arrow in the illustration to release the gas inside.
CAUTION:
- Always use a cloth to prevent metal fragments from being ejected due to the release of pressurized gas.
- Always wear protective goggles.
HINT:
The gas is colorless, odorless and harmless.
Was this page helpful?
